Electrical Device and Home Appliance (Refrigerator Washing Machine) Recyling Line

This recycling line can be used for the electrical device, capacitor, home appliance as refrigerator, washing machine.

For detail information, please contact us.

 

Electrical Device and Home Appliance Recycling Line

Equipment list:

Process Stage	Equipment	Qty
Disassembly	TV & Computer disassemblyworkbench	One set
	Refrigerator & Air conditioner & Washing machine disassemblyworkbench	One set
Shell crush	Metallic shell crush line	One set
	Non-metallic shell crush line	One set
Waste liquid recycling	Waste liquid, and Freon recycling machine	One set
Electronic components disassembly	Tin removal device and electronic components disassembly machine	One set
Circuit board crush	Circuit board processing equipment (model 1001)	One set
Electronic components crush	Electronic components processing equipment (model 600)	One set
Scrap wire processing	Scrap wire crush line	One set

Remarks: 

The annual handling capacity: 200,000-300,000set/yearInclude the cost of the basic motor and electrical cabinet.During the disassembly process, the sum up for copper tube, aluminum tube and steel tube is by manually.Shell is to be crushed after it disassembled.Local freight to the port is excluded.Delivery time: 35~40 days after receipt of full amount payment or sight LC.

Contact: wangtao9 (at) shanghai-electric.com

Reference list:

Taiwan Yangkun Co., Ltd

Taiwan CHOU CHERN INDUSTRLAL CO., LTD

Hong Kong Kingstay Development Co., Ltd

Honking Fortune Group.

Southeast Machinery, USA

P A DISTRIBUTION&MARKETING (P) LTD., India 

Brief Introduction for Electrical Device and Home Appliance Recycle Line (3 platforms + 3 crush lines)

1. Refrigerator & Air conditioner & Washing machine disassembly platform

Open the shell of Refrigerator & Air conditioner & Washing machine, clean and remove the dust by vacuum sweeper;

Draw out the refrigerant (Freon);

Finally start to detach of the internal circuit board and internal modules.

2. TV & Computer disassembly platform

Open the shell of TV & Computer; clean and remove the dust by vacuum sweeper;

To detach the circuit board and electrical wire and deliver to the universal disassembly platform,

Finally start to detach the screen.

3. Circuit board and electric capacity disassembly platform

Use the bench clamp to disassembly the circuit board, remove the electric capacity by heating gun, smoke will be removed by the exhauster of the air purifier on the upper side of the platform,

4. Shell crush line

Applicable to the metallic and non-metallic shell.

Shells go through the level I crusher, to be small pieces at size 8cm*8cm

The small pieces to be delivered by automatically feeding machine to the level II crusher, to be tiny pieces at size 1cm*1cm

(Remarks: there are 3-in-1 dust collectors after the level I & II crusher, can collect the dust in the air and comply with the environmental protection standard)

5. Scrap wire crush line

Scrap electric wire go through the crusher, to be tiny pieces.

The small pieces to be delivered by conveyor to the vibrating screen to separate the materials:

-First sieve: Plastic particles

-Second sieve upper floor: mixture of few Plastic particles and few big copper wire

-Second sieve lower floor: small copper wire.

Material on second sieve upper floor will be crushed again and deliver to the electrostatic separator for complete separation.

(There is exhauster of 3-in-1 dust collector on the upper side of the vibrating screen, can collect the dust in the air and its effect complies with the environmental protection standard)

6. Circuit board crush line

Circuit boards go through the level I crusher, to be small pieces at size 5cm*5cm

Small pieces go through the level II crusher, to be tiny pieces at size less than 1cm*1cm.

Tiny pieces go through the magnetic separator, to collect the steel material.

Rest of the non-steel materials go though the main recycling machine, crushed to size 0.5mm*0.5mm mixture micro particles.

The mixture micro-particles to be blew though the separator by motor fan,

-about 30% are waste materials will be delivered to the 3-in-1 dust collector; its effect complies with the environmental protection standard.

-the rest about 70% mixture micro-particles material will be delivered to a set of combination machines (1 set of classifier + 2 sets of electrostatic separator) to complete separate the metallic materials and waste material.

Characteristic:

-No Harmful gas created, no air pollution.

-Physical separation, no need for water, no water pollution and Acid pollution.

-No noise pollution (less than 70dB)

-No dust pollution (full sets of equipment have the 3-in-1 dust collector

-High recovery for metallic materials (>99.9%)

-high cost performance, high automatization, few human labors

-No-metallic materials also can be used after recycling.

-Apply with ISO9001:2008

-Apply with ISO14004-2004

-By our own patents.

Electrical Device and Home Appliance (Refrigerator Washing Machine) Recyling Line